Sail Fast!

Flying Scot - By Jack Hornor (Boat US editor)

Posted by George Stevens on Wed, Feb 26, 2014 @ 10:33 AM

Flying Scot

Revised by BoatUS editors in October 2012

Flying ScotWhen I speak with sailors and prospective sailors, I am often asked what I would recommend as a good "starter boat" for a beginning sailor. I have toyed with the idea of a "10 best" or similar review but have found there are far too many variables to cover the subject in a column. However, if I were to compile a "10 best" list the Flying Scot would most certainly be included. Among the many reasons I would pick the Flying Scot is that many who chose her for their first sailboat have found her to be the only boat they ever needed. When one boat can provide a lifetime of sailing enjoyment, it's a special boat.

Gordon K. "Sandy" Douglas, the dean of U.S. planing dinghy designers, designed the Flying Scot in 1956 after nearly 40 years of designing and building boats. Douglas had designed and built the 17-foot Thistle in 1945 and followed that with the 20-foot Highlander class in 1951. The Thistle class met with almost immediate success and remains an active racing class today. Although less successful than the Thistle, the Highlander is a big planing hull design with a relatively high sail area/displacement ratio. Those ratios are 47.6 and 40.8 respectively and result in an exciting but fairly demanding boat to sail, one that is not very forgiving of a beginner's mistakes.

For those unfamiliar with the term, sail area/displacements can be thought of as a sailboat's horsepower rating. The higher the sail area/displacement, the greater the horsepower relative the weight of the boat. Rather docile daysailers, in the 16- to 20-foot range, would be expected to have a sail area/displacement ratio in the mid-20s, while for high-performance racing dinghies that number can exceed 70. In an effort to offer a more manageable family oriented boat, Douglas designed the Flying Scot with the same 191 square foot sail area as the Thistle but she weighs in at 850 lbs., 20 lbs. heavier than the Highlander. The resulting sail area/displacement ratio is 34 and to say the combination was a success would be an understatement.

Still in production more than 5,800 Flying Scots were built between 1957 and 2008. The Flying Scot remains one of the leading one-design classes in the United States as well as Douglas&s most successful design.

In 1957, Douglas, who had been one of the principals of Douglas and McLeod Boatbuilders (later Tartan Marine) formed the Gordon Douglas Boat Co. in Ohio to build his new design but soon moved the operation to Western Maryland. Douglas retired in 1971 and sold the business to longtime employee Eric Ammann who, after 20 years of ownership, again sold the business to one of his longtime employees. In 1991 Harry Carpenter bought all the company assets and renamed the company Flying Scot, Inc. This truly unique succession of ownership has resulted in consistant production without interruption.

Unlike the Thistle and Highlander, whose early models were built of cold-molded wood, all Flying Scots are fiberglass constructed and strict one-design class rules dictate how the boats are built. The gelcoat is first sprayed into the mold followed by hand-laid layers of chopped strand fiberglass mat and woven roving fiberglass cloth. Flying Scots have always been built with balsa wood cored composite of the hull and deck. Woven roving is used on both sides of the balsa in the hull layup.

The hull and deck are joined, in a shoebox fashion, using bolts on 12-inch centers and then additionally joined on the inside with fiberglass cloth and resin. This results in a very strong, stiff hull and deck, albeit relatively heavy. As testimony to the strength of their boats, Flying Scot proudly boasts that hull #1, built is 1957, is still going strong. Class rules prohibit Flying Scots from having auxiliary power and most have none. For sailors who are not competing, a small gas or electric outboard can be mounted on a transom bracket. Although the Flying Scot may not cause as many white knuckle moments as Douglas's Thistle and Highlander models, that is not to say her performance is boring or sluggish. Typically raced by a crew of three with a mainsail, jib and spinnaker, the Flying Scot easily planes when reaching and running in a stiff breeze & there are few sailing experiences more exciting. For daysailing, the Flying Scot easily accommodates a family of five or six. There are active Flying Scot fleets throughout the country and new owners are likely to find plenty of great sailors willing to welcome new sailors to their ranks and very willing to share their knowledge and experience.

Few would argue that many of the best sailors began as dinghy sailors. It would be hard to beat a Flying Scot as the place to start.

Flying Scots

Naval architect Jack Hornor was the principal surveyor and designer for Marine Survey & Design, Co., based in Annapolis, MD. He was on the boards of the American Boat and Yacht Council, the National Association of Marine Surveyors, and the Society of Boat and Yacht Designers. He and his wife sailed their Catalina 42, Legacy, based on Maryland's Eastern Shore.

Tags: Belle Haven Marina, Flying Scot, sailing, Mariner Sailing School